Product Description
| Power: | 600w | Voltage: | 220V |
| Exhaust Pressure: | 0.8Mpa | Current: | 3.3A |
| Frequency: | 50HZ | Revolving Speed: | 1420rpm |
| Volume of Gas Storage Tank: | 24L | Cylinder: | 2x55mm |
Scope of application:
Using for Pushing Pneumatic Nail Gun, Air Screw , Spray Painting Gun to work, also use to miniature instrument, blowing dust, Air inflation for small car and so on.
Product Feature:
- High Power, high efficiency, low energy, high reliability.
- Piston Ring: New ECO circle, low friction coefficient, Auto lubricating system.
- Cylinder Liner: Surface hardening, deplete hardness, Accelerate the heat transfer, long using time.
- Suction and exhaust valve: Using advanced foreign technology.
- Multiple Pressure: Overload protection
Oilless Air Compressor Featuers:
1.Super Silent
Super low noise.The output air pressure is stable without fluctuations, reducing noise pollution.
2. Safety
If the voltage or current cause the machine overheat, it will automatically shut down to protect from burnout.
3. Automatic control
Pressure switch automatically controls the start and stop of the machine.
4. Adjustable air pressure
The air pressure can be adjusted to meet the needs of different equipment usage.
5. Save human power
Switch on the air compressor can work normally & automatically. It is easy to operate and does not need human to be on duty.
6. Easy maintenance
No need to add any lubricant, easy maintenance after purchase.
Parts Features
1.Heavy cast iron body: heavy load, long stroke, low fuel consumption, low noise
2.Cylinder: made of high-grade cast iron, strength, good lubricity, wall by the fine honing, wear-resistant, durable
3.Piston ring: good elasticity, excellent wear resistance, low oil consumption, not easy to make the valve group carbon deposition and loss of oil to burn the crankshaft and connecting rod.
4.The crankshaft, connecting rod, piston: well balanced, wear resistance, high strength, smooth running balance.
5.High reliable and durable valve; strong aluminum alloy body, light and heat.
6.The motor provides reliable power, low voltage start up and running performance strong fan cooled motor and body; special shock proof design.
7.Double nozzles, were used to direct the exhaust and pressure exhaust; pressure switch with push button, safe and convenient
8.Oil free,silent,protect-environment,suitable for dental use.
Frequency Asked Question
1.Are you the manufacturer or trading company?
We are the manufacturer.
2.Where is your factory?
It is located in HangZhou City,ZHangZhoug Province,China.
3.What’s the terms of trade?
FOB,CFR,CIF or EXW are all acceptable.
4.What’s the terms of payment?
T/T,L/C at sight or cash.
5.What’s the lead time?
We are the manufacturer.
It is located in HangZhou City,ZHangZhoug Province,China.
FOB,CFR,CIF or EXW are all acceptable.
T/T,L/C at sight or cash.
In 15 days on receipt of deposit .
6.Do you accept sample order?
Yes,we accept.
7.What about the cost of sample?
You have to pay the freight charge.But the cost of product could be refundable,if you will purchase 1x20GP container in the future.
Yes,we accept.
You have to pay the freight charge.But the cost of product could be refundable,if you will purchase 1x20GP container in the future.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Lubrication Style: | Oil-free |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
| Structure Type: | Open Type |
| Installation Type: | Movable Type |
| Samples: |
US$ 60/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
.webp)
How Do You Maintain the Air Quality in a Scroll Compressor System?
Maintaining air quality in a scroll compressor system is vital to ensure optimal performance, prevent contamination, and protect the equipment. Here’s a detailed explanation:
1. Regular Filter Maintenance:
One of the primary methods to maintain air quality is to regularly clean or replace the air filters in the system. Air filters trap dust, debris, and other airborne particles that can potentially contaminate the compressor and affect its performance. Follow the manufacturer’s recommendations for filter maintenance intervals and ensure proper cleaning or replacement as needed.
2. Clean and Inspect Intake Vents:
Inspect and clean the intake vents of the scroll compressor system. These vents allow air to enter the system and can accumulate dirt, leaves, or other debris over time. Regularly remove any debris or obstructions to maintain unimpeded airflow and prevent contaminants from entering the system.
3. Control Moisture and Humidity:
Excessive moisture or high humidity levels can lead to condensation and potential water damage within the compressor system. Install and maintain appropriate moisture control measures such as moisture traps, desiccant dryers, or drain valves to prevent water accumulation. Monitor and control the humidity levels in the compressor room to minimize the risk of moisture-related issues.
4. Preventive Maintenance Schedule:
Implement a preventive maintenance schedule for the scroll compressor system. This includes regular inspections, cleaning, lubrication, and component checks. Follow the manufacturer’s recommended maintenance procedures and intervals to ensure the system remains clean and in optimal condition.
5. Monitor and Address Oil Contamination:
Scroll compressors may be lubricated with oil, which can become contaminated over time. Monitor the oil quality regularly and follow the manufacturer’s guidelines for oil sampling and analysis. If oil contamination is detected, take appropriate measures to address the issue, such as oil filtration or replacement, to maintain clean and uncontaminated air within the system.
6. Minimize Chemical Contaminants:
Avoid introducing chemical contaminants into the scroll compressor system. This includes keeping cleaning agents, solvents, and other chemicals away from the compressor and its intake vents. Ensure that any maintenance or repair work in the vicinity of the compressor follows proper procedures to prevent chemical contamination.
7. Air Leak Detection:
Regularly inspect the compressor system for air leaks. Air leaks can introduce contaminants from the surrounding environment into the system. Use appropriate methods such as ultrasonic leak detectors or pressure tests to identify and seal any air leaks promptly.
8. Follow Environmental and Safety Regulations:
Adhere to relevant environmental and safety regulations governing air quality and compressor systems. This includes compliance with regulations regarding refrigerants, emissions, and disposal of contaminants. Stay updated with industry best practices and guidelines to ensure proper maintenance and adherence to applicable standards.
9. Training and Education:
Provide training and education to personnel responsible for the maintenance of the scroll compressor system. Proper knowledge of maintenance procedures, safety precautions, and the importance of air quality can help ensure consistent and effective maintenance practices.
Regular and proactive maintenance practices are essential to maintaining air quality in a scroll compressor system. By following these guidelines and incorporating air quality maintenance into routine procedures, you can help prolong the life of the compressor, optimize its performance, and reduce the risk of system failures or contamination-related issues.
.webp)
What Safety Precautions Should Be Taken When Operating Scroll Compressors?
Operating scroll compressors requires adherence to specific safety precautions to ensure the well-being of personnel and the proper functioning of the equipment. Here’s a detailed explanation:
1. Read and Follow Manufacturer’s Instructions:
Prior to operating a scroll compressor, carefully read and understand the manufacturer’s instructions and guidelines provided in the user manual. Follow the recommended procedures for installation, operation, maintenance, and troubleshooting.
2. Proper Ventilation:
Ensure that the compressor is installed in a well-ventilated area to prevent the accumulation of heat and the buildup of potentially hazardous gases. Proper ventilation helps dissipate heat generated during operation and maintains a safe working environment.
3. Electrical Safety:
Follow electrical safety practices when working with scroll compressors. Ensure that the compressor is properly grounded and that electrical connections are secure. Only qualified personnel should perform electrical installations and repairs to prevent electrical hazards.
4. Lockout/Tagout Procedures:
When conducting maintenance or servicing tasks on a scroll compressor, implement lockout/tagout procedures to ensure the equipment is safely isolated from electrical and mechanical energy sources. This prevents accidental startup or release of stored energy, safeguarding personnel from potential injuries.
5. Personal Protective Equipment (PPE):
Wear appropriate personal protective equipment when operating or servicing a scroll compressor. This may include safety glasses, gloves, hearing protection, and appropriate clothing to protect against potential hazards such as sharp edges, electrical shock, or noise exposure.
6. Pressure Relief Valves and Safety Devices:
Ensure that pressure relief valves and other safety devices are installed and functioning correctly. These devices protect against excessive pressure buildup in the compressor system, preventing potential equipment failure and hazardous situations.
7. Refrigerant Handling:
When dealing with scroll compressors that use refrigerants, follow proper refrigerant handling procedures. Familiarize yourself with the specific refrigerant being used, including its properties, safe handling practices, and environmental considerations. Comply with applicable regulations regarding refrigerant recovery, recycling, and disposal.
8. Preventive Maintenance:
Implement a regular preventive maintenance program for the scroll compressor. This includes cleaning or replacing air filters, checking and tightening electrical connections, inspecting and lubricating moving parts (if applicable), and monitoring performance parameters. Regular maintenance helps ensure safe and efficient operation of the compressor.
9. Training and Competency:
Ensure that personnel operating or maintaining scroll compressors are adequately trained and competent in their tasks. Training should cover proper operation, maintenance procedures, safety protocols, and emergency response. Ongoing training programs help personnel stay updated with the latest safety practices and industry standards.
10. Emergency Preparedness:
Establish emergency response procedures in case of accidents, leaks, or other hazardous situations involving the scroll compressor. This includes knowing the location of emergency shut-off switches, having access to appropriate safety equipment, and having a clear plan for evacuating personnel if necessary.
Adhering to these safety precautions promotes a safe working environment, reduces the risk of accidents, and ensures the proper operation and longevity of scroll compressors. Always consult the manufacturer’s guidelines and applicable safety regulations for specific recommendations related to your scroll compressor model.
What Is the Efficiency of Scroll Compressors?
The efficiency of scroll compressors can vary depending on various factors. Here’s a detailed explanation:
1. Overall Efficiency:
Scroll compressors are known for their high overall efficiency compared to other compressor types. The scroll design allows for a continuous compression process with minimal clearance volume, reducing energy losses and improving efficiency. This can result in energy savings and lower operating costs in applications where scroll compressors are used.
2. Part Load Efficiency:
The part load efficiency of a scroll compressor refers to its performance at partial cooling or heating loads. Scroll compressors can maintain high efficiency even at part load conditions, thanks to their modulation capabilities. Variable speed scroll compressors, in particular, can adjust their capacity to match the required load, resulting in improved part load efficiency and energy savings. This makes scroll compressors well-suited for HVAC systems that experience varying cooling or heating demands.
3. System Efficiency:
The efficiency of a scroll compressor is not solely determined by the compressor itself but also by the overall system design and components. The efficiency of the entire HVAC system, which includes the compressor, condenser, evaporator, and other components, influences the overall efficiency. Proper system design, sizing, and matching of components are crucial for achieving optimal system efficiency.
4. SEER and EER Ratings:
When evaluating the efficiency of HVAC systems that incorporate scroll compressors, two commonly used metrics are SEER (Seasonal Energy Efficiency Ratio) and EER (Energy Efficiency Ratio). SEER is a measure of the cooling efficiency over an entire cooling season, while EER represents the cooling efficiency at a specific operating condition. Higher SEER and EER ratings indicate greater efficiency. Scroll compressors, with their high efficiency and modulation capabilities, can contribute to achieving higher SEER and EER ratings in HVAC systems.
5. Application-Specific Efficiency:
The efficiency of scroll compressors can also vary based on the specific application and operating conditions. Factors such as ambient temperature, refrigerant type, system design, and load profile can impact the compressor’s efficiency. Manufacturers provide performance data and efficiency specifications for scroll compressors under different operating conditions to help users select the most suitable compressor for their specific application.
It’s important to note that the efficiency of scroll compressors is continuously improving with advancements in technology and design. Manufacturers are constantly working on enhancing the efficiency of scroll compressors to meet the increasing demand for energy-efficient HVAC systems.
In summary, scroll compressors are known for their high overall efficiency and can maintain efficiency even at part load conditions. The efficiency of scroll compressors is influenced by factors such as part load performance, system design, SEER and EER ratings, and application-specific considerations. By selecting the appropriate scroll compressor and optimizing the overall system design, HVAC systems can achieve high levels of efficiency and energy savings.
editor by CX 2024-02-22