Product Description
New Model Class Zero Medical oil free air compressor for Oxygen Generator
The ETC oil-free conversion technology opens up completely new possibilities for providing oil free compressed air in meeting with ISO 8573-1 Class 0 quality standard.
When it comes to holding down up-front operational costs, converter technology is ideally suited for the provision of entirely oil free compressed air. And it is dependable too: Penetration of oil into the compressed air network is absolutely impossible!
Operating costs are extremely low because no costly checkups are required. Commonly occurring risks such as oil penetration have been discarded, and frequent replacement of component elements as with filters has been completely eliminated.
Features of CHINAMFG ETC Series Oil Free Rotary Screw Air Compressor
1. Air quality to ISO8573-1 Class 0 standard with TUV certificate on request
2. Proven Eco-Tec Oil Free Converter technology from Germany and over thousands successful installation reference worldwide
3. Single stage airend design for easy and cost saving maintenance
4. T. E. F. C. IP55 class F electric motor in compliance with IEC/DIN standards
5. Modern concept suction valve with energy saving modulation control as option
6. Intelligent PLC control panel with sequential / remote control functions
7. Reliable automatic control box with “Siemens” contactors
8. High efficiency aftercooler (air- or water- cooled available)
Proper disposal is no problem either as a matter of fact, in terms of oil content the condensate is of drinking water quality! In the ETC converter the long hydrocarbon chains of the residual oil contained in the compressed air are broken up into harmless carbon dioxide and water, i.e. substances occurring naturally in the air.
The catalytic converter incorporates a container with compact granulated pellets through which the compressed air circulates. This process breaks down and converts both oil droplets and oil vapors. The condensate that forms afterwards is therefore completely oil free and can be disposed of much less expensively and without the need for additional treatment.
Oil/hydrogen concentration is below 0,0571 mg/m3. The addition of the catalytic converter guarantees class 1 compressed air (ISO 8573-1) for all applications where oil free compressed air is essential.
ADEKOM (ASIA PACIFIC) LIMITED founded in the late 90’s is a specialized air/gas compressors and treatment system manufacturer with headquarter in Hong Kong. Its partners located in Vicenza, Italy and Germering, Germany are the world’s leading manufacturers with global recognition and experience in designing, manufacturing and marketing of rotary screw air/gas compressors for decades. QUALITY, RELIABILITY and ENERGY EFFICIENCY have been the main objectives of serving customers all over the world. CHINAMFG follows the company core of its European partners, is committed to the research & development, quality assurance and satisfaction of customers’ needs. Today, what CHINAMFG can do is not just to supply the best products to the market, but to provide THE TOTAL SOLUTION TO YOUR NEEDS!
CONTACT US
Asia Pacific Market: Spencer Lau (Ms.)
European/ Middle Eastern/ African Market: Echo Lok (Ms.)
American Market: Alice Kwok (Ms.)
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Yes |
|---|---|
| Warranty: | 12 Months |
| Lubrication Style: | Oil-free |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Angular |
| Customization: |
Available
|
|
|---|
.webp)
How Do Oil-Free Compressors Contribute to Clean Compressed Air?
Oil-free compressors play a crucial role in delivering clean compressed air for various applications. Their design and operation eliminate the risk of oil contamination, ensuring the quality and purity of the compressed air output. Here’s a detailed explanation of how oil-free compressors contribute to providing clean compressed air:
1. Elimination of Oil Contamination:
The primary advantage of oil-free compressors is that they eliminate the presence of oil in the compressed air stream. In traditional oil-lubricated compressors, lubricating oil is used to reduce friction, cool the compressor, and seal internal components. However, this oil can contaminate the compressed air, leading to potential issues in sensitive applications such as food and beverage production, pharmaceuticals, electronics manufacturing, and painting. Oil-free compressors eliminate the risk of oil carryover, ensuring that the compressed air remains free from oil contaminants.
2. Advanced Filtration Systems:
Oil-free compressors are equipped with advanced filtration systems to remove particulates, moisture, and other contaminants from the intake air. These filtration systems typically consist of pre-filters, coalescing filters, and activated carbon filters. Pre-filters remove larger particles, while coalescing filters capture smaller particles and coalesce water vapor into droplets. Activated carbon filters help eliminate odors and absorb any remaining oil vapors or hydrocarbons. These filtration stages work together to ensure that the compressed air is clean, dry, and free from contaminants.
3. Enhanced Air Quality:
By eliminating oil contamination and incorporating effective filtration systems, oil-free compressors contribute to enhanced air quality in compressed air systems. Clean compressed air is essential in applications where air purity is critical to product quality, process integrity, and the health and safety of personnel. For example, in the food and beverage industry, oil-free compressors help maintain the purity of compressed air used in food processing, packaging, and storage, preventing any potential product contamination. Similarly, in pharmaceutical manufacturing, oil-free compressors ensure that the compressed air meets the stringent air quality standards required for drug production.
4. Reduced Maintenance Requirements:
Oil-free compressors have lower maintenance requirements compared to oil-lubricated compressors. The absence of oil means there is no need for oil changes, oil filter replacements, or oil analysis. This not only reduces maintenance costs but also eliminates the risk of oil leaks or oil-related component failures. Furthermore, without oil in the system, there is no need for oil-water separation equipment, reducing the complexity and maintenance needs of the compressed air system. The simplified maintenance routine contributes to the overall cleanliness and reliability of the compressed air supply.
5. Compliance with Industry Standards:
Oil-free compressors are designed and built to comply with industry standards and regulations related to air quality and purity. These standards, such as ISO 8573, define specific limits for contaminants in compressed air, including oil content, particulate matter, and moisture. Oil-free compressors are engineered to meet or exceed these standards, ensuring that the compressed air generated is suitable for use in critical applications. Compliance with industry standards provides assurance to users that the compressed air is clean and meets the required specifications.
Oil-free compressors are highly valued in industries where clean compressed air is essential. Their ability to eliminate oil contamination, incorporate advanced filtration systems, deliver enhanced air quality, reduce maintenance requirements, and comply with industry standards makes them an ideal choice for applications that demand clean and reliable compressed air.
.webp)
What Is the Role of Filtration in Maintaining Air Quality in Oil-Free Compressors?
Filtration plays a crucial role in maintaining air quality in oil-free compressors. Here’s a detailed explanation of the role of filtration and its importance in ensuring clean and contaminant-free compressed air:
1. Removing Solid Particles:
One of the primary functions of filtration in oil-free compressors is to remove solid particles from the compressed air. Ambient air contains various contaminants such as dust, dirt, pollen, and other particulates. These particles can potentially damage downstream equipment, clog pneumatic components, and compromise the quality of the compressed air. Filtration systems, typically consisting of pre-filters and main filters, are used to capture and remove these solid particles, preventing them from entering the compressed air system.
2. Protecting Equipment:
Filtration helps protect the equipment and components of the compressed air system, including valves, cylinders, pneumatic tools, and instruments. Solid particles present in the compressed air can cause abrasion, wear, and damage to these components, leading to decreased performance, increased maintenance, and potential system failures. By effectively removing solid particles, filtration ensures the longevity and reliability of the equipment, reducing the need for frequent repairs and replacements.
3. Preventing Contamination:
Oil-free compressors are designed to produce clean, oil-free compressed air. However, certain contaminants can still find their way into the compressed air system. Filtration plays a vital role in preventing contamination by removing substances such as oil aerosols, water vapor, and microorganisms. These contaminants can be introduced through ambient air or can result from the compression process itself. Proper filtration ensures that the compressed air remains free from these contaminants, meeting the required air quality standards for specific applications.
4. Achieving Air Purity:
Many applications require compressed air with specific purity levels. For instance, in industries like pharmaceuticals, food and beverage, electronics, and healthcare, high-quality compressed air is essential to prevent product contamination or ensure the safety of sensitive processes. Filtration, along with other air treatment components such as dryers and separators, helps achieve the desired air purity levels by removing particulates, moisture, oil, and other impurities. This ensures that the compressed air meets the required standards and complies with industry regulations.
5. Extending Maintenance Intervals:
Efficient filtration in oil-free compressors can contribute to extended maintenance intervals. By effectively capturing and removing contaminants, filtration reduces the accumulation of debris and deposits within the compressed air system. This, in turn, reduces the frequency of maintenance tasks such as cleaning, purging, and component replacements. Extended maintenance intervals not only save time and labor but also minimize system downtime and associated costs.
6. Preserving Product Quality:
In applications where compressed air comes into direct contact with products or processes, maintaining air quality is crucial to preserve product integrity and quality. Contaminated compressed air can introduce impurities, odors, or foreign substances that may adversely affect the final product. Filtration ensures that the compressed air remains clean and free from contaminants, safeguarding the quality, purity, and consistency of the end products.
Overall, filtration plays a vital role in maintaining air quality in oil-free compressors. By removing solid particles, preventing contamination, achieving air purity, protecting equipment, extending maintenance intervals, and preserving product quality, filtration systems contribute to the reliable and efficient operation of compressed air systems in various industries and applications.
Can Oil-Free Compressors Be Used in Medical Applications?
Yes, oil-free compressors can be used in medical applications and are widely utilized in various healthcare settings. These compressors provide clean, oil-free compressed air, making them suitable for critical medical processes and equipment. Here’s a detailed explanation of the use of oil-free compressors in medical applications:
1. Surgical Tools and Instrumentation:
Oil-free air compressors are commonly used in surgical suites and operating rooms to power pneumatic surgical tools and instrumentation. Surgical tools, such as pneumatic drills, saws, and shavers, rely on compressed air for their operation. Using oil-free compressors ensures that the compressed air delivered to these tools is free from oil contamination, reducing the risk of oil particles entering the surgical site or interfering with the sterile environment.
2. Respiratory Devices:
In respiratory care, oil-free compressors play a vital role in powering various medical devices, such as ventilators, nebulizers, and continuous positive airway pressure (CPAP) machines. These devices require a clean and reliable source of compressed air to deliver oxygen or medication to patients. Oil-free compressors ensure that the compressed air produced is free from oil, providing safe and effective respiratory support.
3. Dental Equipment:
Oil-free compressors are extensively used in dental offices and clinics to power dental tools and equipment, including dental drills, air syringes, and suction devices. Dental procedures require a high level of precision, and any contamination in the compressed air can compromise patient safety and treatment outcomes. By using oil-free compressors, dental professionals can ensure the delivery of clean, oil-free compressed air for optimal dental care.
4. Laboratory Applications:
Oil-free compressors are employed in various laboratory applications within the medical field. These applications include air supply for analytical instruments, sample preparation, cell culture, and other research processes. Oil-free compressed air is essential in maintaining the integrity of samples, preventing contamination, and ensuring accurate and reliable test results.
5. Pharmaceutical Manufacturing:
In pharmaceutical manufacturing, oil-free compressors are utilized to provide clean compressed air for critical processes. This includes applications such as product drying, powder handling, and packaging. Oil-free compressed air ensures the purity and quality of pharmaceutical products, meeting stringent regulatory requirements and minimizing the risk of contamination.
6. Medical Gas Systems:
Oil-free compressors are an integral part of medical gas systems, which provide essential gases like oxygen, nitrogen, and compressed air throughout healthcare facilities. These gases are used for various medical purposes, such as patient breathing, anesthesia, laboratory testing, and respiratory therapy. Oil-free compressors ensure the delivery of clean and uncontaminated medical gases, maintaining patient safety and the reliability of medical gas systems.
Oil-free compressors offer the necessary features and performance required for critical medical applications. They provide clean, oil-free compressed air, ensuring patient safety, maintaining sterility, and meeting regulatory standards. However, it’s important to select oil-free compressors specifically designed and certified for medical applications and adhere to manufacturer guidelines and maintenance protocols to ensure optimal performance and patient care.
editor by CX 2024-02-14