Solution Description

Products Description

Positive aspects:

1. China-Japan latest technological innovation cooperation, high trustworthiness.

two. Oil Cooling Long lasting Magnetic Motor.
three. IP65 protection grade & large obligation air filter, suited for high dusty setting.
4. IE4 Performance motor performance.
five. Most power saving method, Only perform at loading.
6. Wide frequency range 25%-a hundred%.
seven. Top quality Magnetic substance resist far more than 180ºC temp.
eight. Reputable PM motor provider from Italy.
9. Direct Taper relationship, no transmission electricity decline, effortless servicing.
ten.Touch Display PLC with preset operating schedule, far more clever management.
11. Equally primary motor and enthusiast motor are inverter management, more correct control.
twelve. Easy for installation and support.
thirteen. Wonderful Energy Preserving, conserve up to more than 30-40%.

 

Information Photographs

 

High Effectiveness AIREND

 

Substantial performance Airend profile, specially layout this PM motor application, enhance the compressor performance. * First planet well-known bearing manufacturer from CZPT or CZPT or FAG. * Large airend with minimal RPM to aid get better efficiency, max. RPM is close to 1500RPM, extend daily life span of airend.

 

Substantial High quality PM MOTOR

 

The motor winding get use of new engineering vacuum expoxy potting method, it enhance the thermal conducivity and motor insulation defense

Computerized vacuum expoxy processing enhance the motor quality

The new seal technologies of winding, it is sealed with expoxy, better protection for winding.

F grade insulation grade, resist up to 180degree, integrated PTC defense.

 

 

PM MOTOR COOLING

 

Liquid Cooling, IP65 PM Motor. Indepent cooling system.

 

SCR weighty responsibility air filter

 

 

OVERSIZE COOLER

 

Oversize Cooler to make certain the compressor run max up to 46degree with no any problem.

 

Most current Contact Display PLC

 

* 7″ Inch contact screen show. * Entire function defense. * Multi smart management, like running schedule. * Assist Modbus
RTU. * Distant checking is alternative

 

Substantial Performance SEPARATION System

Cyclone oil tank design encsure the large separation performance. Initial phase mechanical centrifugal separation. Second phase is higher performance oil separator. 4000hours lifestyle-span of oil separator. The oil content material is decrease than 3PPM.

 

Latest V/F Inverter

 

* Newest V/F technology Inverter. * CE/UL Certificed Inverter. * Each Motor are inverter management. * Substantial reputable inverter brand name proofed in the industry. * Specialist services help. * Computerized airend speed adjust to match your air demand, assist great vitality saving

Why Decide on EPM2

Functionality COMPARISON VSD

10% far better efficiency examine with classic compressor

Functionality COMPARISON Set Velocity

16%-twenty% power savint compare with classic compressor

Certifications

 

 

Advocate Items

 

 

 

Company Profile

ZheJiang Screw Compressor Co., Ltd(SCR) is a foremost compressor company in ZheJiang , China with wealthy expertise. Our model “SCR” is the No. 1 native compressor brand in China. Which is also authorized “ZheJiang Popular model”, “ZheJiang effectively-identified trade mark”.

As a high-tech company, CZPT focuses on creating and production of screw air compressor, owning a item household largely include stationary, mobile, oil cost-free and frequency compressor. CZPT products handed CE, UL, CSA, ASME certification.

As top native compressor brand, the good results of CZPT contributes to the excellent blend of our unremitting attempts and sophisticated tech globally.

Top quality, competitive prices, sound throughout the world distribution community and provider as our hallmark have enabled us to serve our buyers about the globe. Our goods are obtainable in 43 countires covering Europe, The usa, Australia, Asia, Africa, Center-East, and in international locations this kind of as Usa, Canada, U. K., Germany, Hungary, Italy, Spain, Poland, Finland, Russia, Australia, U. A. E, Saudi Arabia, Egypt, Singapore, Thailand, Vietnam, Malaysia, Indonesia, India, South Africa, Morocco, Algeria, Colombia, Mexico, Argentina, Brasil, and so forth. At same time we have 22 distributors in diffierent international locations.

 

 

Exhibition

 

FAQ

one What trade conditions do we provide? What sort of settlement currency do we offer?
Trade term :CIF ,CFR ,FOB,Ex-Performs As far Our company traded in Pounds ,Euros and RMB .

two How long is our supply?
Our regular shipping time is 30-40 times soon after confirmation get & acquiring recipets for normal compressors, for the other non common need will be mentioned circumstance by circumstance.

three What is the voltage of the compressor?
The available voltage consist of 380V/50HZ/3Phase, 400V/50HZ/3P, 415V/50HZ/3P, 220V/60HZ/3P, 380V/60HZ/3P, 440V/60HZ/3P. At the exact same time we supply other voltage in accordance to consumer need.

four Can our compressor run in higher temperature environment? What is the operating temperature selection for our equipment?
Yes ,our equipment would run in substantial temperature surroundings ,till now our merchandise have been bought to many international locations which wouldmeet large temperature in summer season ,this kind of like Iraq, Saudi Arabia, Egypt, Algeria, and so on. Operate temperature range :1-forty five ºC(33.8ºF-113ºF)

five What’s the min. Buy necessity ?
Min. Buy prerequisite is 1PCS.

Model :	Energy Saving Series (EPM2)
Type:	Oil Injected Permanent Magnetic Screw Compressor
Voltage:	380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements
Working Pressure:	7bar/8bar/10bar
Installed Motor Power:	55~110 Kw
Color:	Blue
Driven Method:	Taper Connection Direct Driven
Air End:	High Efficiency Airend
Trademark:	SCR
Transport Package:	Standard Wooden Packing
Available Certificate:	CE, ISO, UL, ASME, GHOST
Origin:	Shanghai, China
application:	Packing,Painting,Precision Electroplating,Peparing

###

Model	Rated Pressure (BAR)	Capacity (m3/min)	Motor Power (kW)	Specific Power (kW/(m3/min))	Electric Power cost (kW/m3)	Energy Saving %
SCR100EPM2	8	16	75	6.19	0.1031
Traditional VSD	8	13	75	6.9	0.115	11.5%
Traditional VSD	8	16	90	6.75	0.1125	9.1%

###

Model	Capacity	Motor Power	Specific Power	Electric Power cost	Loading Percentage	Acutal Electric Power cost	Energy Saving %
	(m3/min)	(kW)	(kW/(m3/min))	(kW/m3)		(kW/m3)
SCR100EPM2	16	75	6.19	0.1031	0.1051
Traditional	13	75	6.9	0.115	0.1251	19.03%	19.03%
Traditional	16	90	6.75	0.1125	0.1223	16.37%	16.37%

Model :	Energy Saving Series (EPM2)
Type:	Oil Injected Permanent Magnetic Screw Compressor
Voltage:	380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements
Working Pressure:	7bar/8bar/10bar
Installed Motor Power:	55~110 Kw
Color:	Blue
Driven Method:	Taper Connection Direct Driven
Air End:	High Efficiency Airend
Trademark:	SCR
Transport Package:	Standard Wooden Packing
Available Certificate:	CE, ISO, UL, ASME, GHOST
Origin:	Shanghai, China
application:	Packing,Painting,Precision Electroplating,Peparing

###

Model	Rated Pressure (BAR)	Capacity (m3/min)	Motor Power (kW)	Specific Power (kW/(m3/min))	Electric Power cost (kW/m3)	Energy Saving %
SCR100EPM2	8	16	75	6.19	0.1031
Traditional VSD	8	13	75	6.9	0.115	11.5%
Traditional VSD	8	16	90	6.75	0.1125	9.1%

###

Model	Capacity	Motor Power	Specific Power	Electric Power cost	Loading Percentage	Acutal Electric Power cost	Energy Saving %
	(m3/min)	(kW)	(kW/(m3/min))	(kW/m3)		(kW/m3)
SCR100EPM2	16	75	6.19	0.1031	0.1051
Traditional	13	75	6.9	0.115	0.1251	19.03%	19.03%
Traditional	16	90	6.75	0.1125	0.1223	16.37%	16.37%

Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of ​​the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.