Product Description
FUSHENG Stationary Screw Air Compressor
Model: ZW905W
|
ZW Series Water Injected Oil Free Air Compressors |
||
|
ZW Series Oil Free Screw Compressors produce totally oil-Less air with a water injected compression process that is completely free of any hydrocarbons. Highly efficient, fixed speed models deliver up to 15% energy savings over dry screw type compressors. Low operating temperatures, slow direct-drive running speeds ensure high reliability with the most advanced air end in the industry.
Naturally “Green” by design, each provides high quality air, low dB(A) noise levels, efficient use of energy, and no oil discharge to the environment. Even service costs are very low with no oil filters, oil separators or oil to dispose.
ZW’s 4-Stage Water Purification System with reverse osmosis membrane & water pump is furnished standard to remove all contaminants to provide clean, flat water to prevent contamination buildup on the internal components. Total water filtration, cleaning and automatic flushing ensure high air quality and long component life cycles.
Our advanced alphanumeric display Controller manages the system and monitors temperatures and pressures to protect your investment and ensure you extract the maximum performance and energy efficiency from every kilowatt you use. When your application requires clean, high quality air count on the ZW Series for truly oil-less air.
ZW Compressors are environmentally safe with high efficiency and are an extension of our current offering of Oil Less piston compressors. FS-Curtis oil free compressors serve the majority of your compressed air needs.
Variable Speed Driven ZW compressors offer an additional 30-35% energy savings and long life cycle to customers with variable air demand. |
||
|
Oil-Less Design
High Efficiency
Low Cost Service
High Reliability
High Quality Air
|
About FSI
Since CHINAMFG was founded in 1953, it has transformed from a small ZheJiang ese company to a regional manufacturing enterprise, taking root in China and various Southeast Asian countries such as Malaysia, Thailand, Indonesia and Vietnam. The company was initially built from the ground up, and it overcame daunting challenges to gain a foothold in ZheJiang , where it specialized in overhauling all types of air compressors made in European countries, the United States of America, and Japan. Over the years, CHINAMFG expanded its reach to Europe and North America through mergers and acquisitions, allowing it to become 1 of the most globalized manufacturing groups in the compressor field. CHINAMFG attributes its growth and persistence to its commitment to meet the mission, “Pursuing CHINAMFG and Enriching Life”, as embraced by its founder, Mr. Hou-Teng Lee. As the company continues to grow, it aims to create products and services that are not only competitive in the international market, but also meet the requirements for better environmental protection, energy efficiency, high-quality, and customer satisfaction. With Fusheng’s leading edge and patented R&D technology, automated production equipment, global distribution channels, and integrated global resources, CHINAMFG is equipped to provide a full and complete product line.
Our company’s purpose – to help make life better by relying on us – and the set of values that define us are the foundation of our company’s culture and success. We think and act like owners, taking responsibility for our own actions and always striving to care for our neighbors and create a brighter, healthier shared planet for everyone. We are committed to the success of our customers. Our goal is to operate with clarity and straightforwardness, building lifelong, ongoing and meaningful connections with our customers.
We are driven by a spirit of action and an entrepreneurial spirit of innovation and progress; we accept and embrace the many challenges that come with such responsibility. We speak honestly, admit mistakes, and always strive for openness and clarity. We have bold ambitions while moving CHINAMFG with humility and integrity, striving to earn trust every day. We have the expertise and experience to solve the toughest problems, but no matter how difficult the challenge, we are always sincere and humble. We are committed to fostering team innovation and cultivating and celebrating a culture that embraces diverse opinions, backgrounds and experiences. Employees who are driven by our purpose and values are an unstoppable force that strengthens our ability to deliver benefits to our stakeholders and ensure the long-term health and safety of our company.
Bestrand is a leading supplier of compressed air system. Past 10 years, we established very good partnership with FUSHENG. We have provided all kinds of products from CHINAMFG include air compressor, after treatment, spare parts to customers all over the world. Pls feel free to contact us for a quote.
| Lubrication Style: | Oil-free |
|---|---|
| Cooling System: | Air Cooling or Water Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
| Structure Type: | Closed Type |
| Installation Type: | Stationary Type |
| Customization: |
Available
|
|
|---|
.webp)
Can Oil-Free Air Compressors Handle High-Pressure Applications?
Yes, oil-free air compressors are capable of handling high-pressure applications, but certain considerations need to be taken into account. Here’s a detailed explanation of the capabilities and considerations regarding the use of oil-free air compressors in high-pressure applications:
1. Compressor Design:
Oil-free air compressors are designed to deliver oil-free compressed air, and some models are specifically engineered to handle high-pressure requirements. These compressors incorporate robust components, such as high-strength materials, reinforced valves, and advanced sealing technologies, to withstand the higher pressures generated during compression. They are typically designed to operate within specific pressure ranges, and their performance and reliability are optimized for those ranges.
2. Pressure Rating:
When selecting an oil-free air compressor for a high-pressure application, it is crucial to consider the compressor’s pressure rating. The pressure rating indicates the maximum pressure that the compressor can reliably generate and maintain. Oil-free compressors suitable for high-pressure applications are available with varying pressure ratings, ranging from several hundred PSI (pounds per square inch) to several thousand PSI, depending on the specific model and manufacturer. It’s important to choose a compressor with a pressure rating that meets or exceeds the requirements of the intended application.
3. Operating Efficiency:
Operating efficiency is an important consideration when using oil-free air compressors for high-pressure applications. As the pressure requirement increases, the compressor may consume more energy to achieve and maintain the desired pressure. It’s advisable to select a compressor that is optimized for energy efficiency, as it can help reduce operating costs and minimize environmental impact. Compressors equipped with advanced control systems, variable speed drives, and efficient motor designs can enhance overall energy efficiency in high-pressure applications.
4. Air Treatment and Filtration:
High-pressure applications often require dry and clean compressed air. In addition to the oil-free operation, it is important to ensure that the compressed air is adequately treated and filtered to remove moisture, particulates, and other contaminants. The use of appropriate air dryers, filters, and separators in the compressed air system is necessary to maintain the desired air quality and protect downstream equipment in high-pressure applications.
5. System Safety and Regulations:
High-pressure applications present additional safety considerations. It is essential to ensure that the entire compressed air system, including the compressor, storage tanks, piping, and safety devices, is designed, installed, and operated in compliance with relevant safety regulations and standards. Pressure relief valves, pressure gauges, and other safety devices should be appropriately sized and configured to handle the high-pressure conditions. Regular inspections, maintenance, and adherence to safety protocols are crucial to ensure the safe operation of the high-pressure oil-free air compressor system.
It’s important to consult with compressor manufacturers or industry experts to determine the suitability of specific oil-free compressors for high-pressure applications. They can provide guidance on selecting the right compressor model, assessing system requirements, and ensuring compliance with safety standards.
By considering the design, pressure rating, operating efficiency, air treatment, and system safety, oil-free air compressors can successfully handle high-pressure applications in various industries, including manufacturing, automotive, aerospace, and energy.
.webp)
Can Oil-Free Compressors Be Integrated into Existing Systems?
Yes, oil-free compressors can be integrated into existing systems in many cases. Here’s a detailed explanation of the integration possibilities and considerations when incorporating oil-free compressors into existing systems:
1. Compatibility:
Before integrating an oil-free compressor into an existing system, it’s important to assess the compatibility between the compressor and the system. Consider factors such as the required air pressure and flow rate, the electrical requirements, and the physical space available for installation. Compare these requirements with the capabilities and specifications of the oil-free compressor to ensure a suitable match.
2. Installation:
The installation process may vary depending on the specific system and compressor configuration. In some cases, it may be a straightforward replacement of the existing compressor with the oil-free compressor. However, certain modifications or adjustments may be necessary to accommodate the differences between oil-lubricated and oil-free compressors. For example, oil-free compressors may require additional filtration or moisture removal equipment to maintain the desired air quality. It’s essential to follow the manufacturer’s installation guidelines and consult with qualified professionals if needed.
3. Piping and Connections:
When integrating an oil-free compressor into an existing system, the piping and connections need to be evaluated. The existing piping should be inspected for any potential issues such as leaks, corrosion, or inadequate sizing. Depending on the specific requirements of the oil-free compressor, modifications to the piping system may be necessary to ensure proper airflow, pressure drop, and connection compatibility. It’s crucial to ensure that the piping system can handle the air volume and pressure generated by the oil-free compressor without any restrictions or safety risks.
4. Control and Monitoring:
Integrating an oil-free compressor into an existing system may involve adjustments to the control and monitoring components. The control system should be capable of effectively operating and regulating the oil-free compressor based on the desired air pressure and flow requirements. This may require reprogramming or reconfiguring the control settings to accommodate the specific features and functionalities of the oil-free compressor. Additionally, monitoring systems should be updated to include relevant parameters specific to oil-free compressor operation, such as air purity levels or maintenance alerts.
5. Training and Familiarization:
When integrating an oil-free compressor into an existing system, it’s important to provide training and familiarization to the personnel responsible for operating and maintaining the equipment. The differences between oil-lubricated and oil-free compressors should be clearly explained, including any specific maintenance requirements or operational considerations. Training sessions can help ensure that the staff understands the new equipment and can effectively operate and maintain it in a safe and efficient manner.
6. Benefits and Considerations:
Integrating an oil-free compressor into an existing system offers several benefits. It can improve air quality, eliminate the risk of oil contamination, and enhance the performance and reliability of the compressed air system. However, it’s important to consider the initial investment costs, potential modifications required, and the overall compatibility with the existing system. Conducting a thorough cost-benefit analysis and consulting with experts can help determine the feasibility and potential advantages of integrating an oil-free compressor into the existing system.
In summary, oil-free compressors can generally be integrated into existing systems with proper assessment, planning, and installation procedures. Evaluating compatibility, ensuring appropriate installation, addressing piping and connection requirements, adjusting control and monitoring systems, providing adequate training, and considering the associated benefits and considerations are crucial steps in successfully integrating an oil-free compressor into an existing system.
.webp)
Can Oil-Free Compressors Be Used in Medical Applications?
Yes, oil-free compressors can be used in medical applications and are widely utilized in various healthcare settings. These compressors provide clean, oil-free compressed air, making them suitable for critical medical processes and equipment. Here’s a detailed explanation of the use of oil-free compressors in medical applications:
1. Surgical Tools and Instrumentation:
Oil-free air compressors are commonly used in surgical suites and operating rooms to power pneumatic surgical tools and instrumentation. Surgical tools, such as pneumatic drills, saws, and shavers, rely on compressed air for their operation. Using oil-free compressors ensures that the compressed air delivered to these tools is free from oil contamination, reducing the risk of oil particles entering the surgical site or interfering with the sterile environment.
2. Respiratory Devices:
In respiratory care, oil-free compressors play a vital role in powering various medical devices, such as ventilators, nebulizers, and continuous positive airway pressure (CPAP) machines. These devices require a clean and reliable source of compressed air to deliver oxygen or medication to patients. Oil-free compressors ensure that the compressed air produced is free from oil, providing safe and effective respiratory support.
3. Dental Equipment:
Oil-free compressors are extensively used in dental offices and clinics to power dental tools and equipment, including dental drills, air syringes, and suction devices. Dental procedures require a high level of precision, and any contamination in the compressed air can compromise patient safety and treatment outcomes. By using oil-free compressors, dental professionals can ensure the delivery of clean, oil-free compressed air for optimal dental care.
4. Laboratory Applications:
Oil-free compressors are employed in various laboratory applications within the medical field. These applications include air supply for analytical instruments, sample preparation, cell culture, and other research processes. Oil-free compressed air is essential in maintaining the integrity of samples, preventing contamination, and ensuring accurate and reliable test results.
5. Pharmaceutical Manufacturing:
In pharmaceutical manufacturing, oil-free compressors are utilized to provide clean compressed air for critical processes. This includes applications such as product drying, powder handling, and packaging. Oil-free compressed air ensures the purity and quality of pharmaceutical products, meeting stringent regulatory requirements and minimizing the risk of contamination.
6. Medical Gas Systems:
Oil-free compressors are an integral part of medical gas systems, which provide essential gases like oxygen, nitrogen, and compressed air throughout healthcare facilities. These gases are used for various medical purposes, such as patient breathing, anesthesia, laboratory testing, and respiratory therapy. Oil-free compressors ensure the delivery of clean and uncontaminated medical gases, maintaining patient safety and the reliability of medical gas systems.
Oil-free compressors offer the necessary features and performance required for critical medical applications. They provide clean, oil-free compressed air, ensuring patient safety, maintaining sterility, and meeting regulatory standards. However, it’s important to select oil-free compressors specifically designed and certified for medical applications and adhere to manufacturer guidelines and maintenance protocols to ensure optimal performance and patient care.
editor by CX 2023-10-27