Product Description
Ā
Product Description
GWSPC Oil free Scroll Vacuum Compressor
Working principle:
GWSPC oil free scroll vacuum compressor is constructed with machine head assembly, crank pin assembly, bracket assembly, air flush assembly, and exhaust valve assembly. Two spiral cylinders, 1 offset and orbiting against the other fixed with an offset of 180Ā° to form several crescent-shaped pockets of differing sizes. By means of an eccentric drive, the orbiting scroll is made to orbit about the fixed scroll, reducing the volume of the pockets and compressing gas from outside towards the inside thereby pumping the gas from vacuum chamber and compressing.
Basic informations:
1) Model:Ā GWSPC600 Oil free Scroll Vacuum Compressor
2) Ultimate vacuum pressure: 10.0Pa
3) Max suction capacity:Ā 50Hz-18.7cfm 60Hz-22.3cfm
Safety Precautions:
The GWSPC series oil free scroll vacuum compressor are suitable for clean processes only.Ā
Do not use toxic, explosive, flammable or corrosive substances or substances which contain chemicals, solvents or particles.GEOWELL will not perform maintenance work on compressors which have used special gases or other hazardous substances.Ā
Be sure the inlet gas temperature must be less than 122 F.
Ā
Technical Specifications
| Model | GWSPC75 | GWSPC150 | GWSPC300 | GWSPC600 | GWSPC1000 | ||
| Pumping Speed | 50Hz | m3/h | 3.6 | 7.2 | 15.5 | 31.3 | 59.8 |
| cfm | 2.2 | 4.3 | 9.3 | 18.7 | 35.8 | ||
| 60Hz | m3/h | 4.3 | 8.6 | 18.3 | 37.4 | 71.6 | |
| cfm | 2.5 | 5.1 | 10.9 | 22.3 | 42.8 | ||
| Ultimate Pressure | mbar | ā¤3.0*10-1 | ā¤3.0*10-1 | ā¤2.0*10-1 | ā¤1.0*10-1 | ā¤1.0*10-1 | |
| Torr | ā¤2.2*10-1 | ā¤2.2*10-1 | ā¤1.5*10-1 | ā¤7.5*10-1 | ā¤7.5*10-1 | ||
| Noise Level | dB(A) | ā¤57 | ā¤57 | ā¤61 | ā¤63 | ā¤65 | |
| Max. Inlet/Exhaust Pressure | MPa | 0.1/0.3 | |||||
| Ambient Operation Temp. | ĀŗF | 41~104 | |||||
| Motor 3 phase | Power | kW | 0.55 | 0.55 | 1.5 | 2.2 | 3.0Ā |
| Voltage | V | 200~230 or 380~415 (50Hz), 200~230 or 460 (60Hz) | |||||
| Speed | rpm | 1425 (50Hz), 1725 (60Hz) | |||||
| Inlet/Exhaust Flange | Ā | KF25/KF16 | KF40/KF16 | KF40/KF16*2 | |||
| Dimensions | mm | 450*206*296 | 455*260*296 | 540*287*334 | 578*315*355 | 655*380*402 | |
| Weight | kg | 21 | 22 | 39 | 53 | 64 | |
| Cooling Type | Ā | Air cooled | |||||
Features & Benefits
Ā
No oil clean vacuum.
No oil back-diffusion, no oil mist exhaust, provide clean vacuum environment
Wide product lineup.
Pumping speed covers 7~60 m3/h, limited vacuum level 10~30 Pa
Suitable for all type of power supply around the world.
220/380/460V, 50/60Hz for choose
Low vibration, low noise.
57~65 dB(A), smooth operation
High efficiency, ease of maintenance.
No water cooled, no oil lubricated, no daily maintenance
Ā
Ā
Ā
Quality Control
CMM inspection system assures
fixed tolarance on dimension&shape
Pump Testing
Applications
Ā· SF6 recovery and recirculating
Ā· Special gas recovery
Ā
SF6 Recirculation Station.
R134/R22 Recirculation System.
Related Products
Ā
GWMMK600 Major Maintenance Kit
Performance: Prolong the service life of the product.
Application: For the major maintenance of oil free scroll vacuum compressor GWSPC600.
GWTSK600 Tip Seal Kit
Performance: Prolong the service life of the product.
Application: For the scheduled maintenance of oil free scroll vacuum compressor GWSPC600.
Ā
Company Profile
GEOWELL VACUUM CO.,LTD. is a HI-TECH enterprise in China dedicating in manufacturing, research and development, marketing of oil free scroll vacuum pumps and vacuum compressors since 2002. GEOWELL has been providing users and partners with premium quality products that are efficient and dependable, GEOWELL believe the integration of high performance and high reliability product and service will bring the highest value to both our customers and ourselves.
FAQ
Q: How long can I get the feedback after we sent the inquiry?
A: We will reply you within 12 hours in working day.
Q: Are you direct manufacturer?
A: Yes, we are direct manufacturer with factory and international department; we manufacture and sell all our products byĀ ourselves.
Q: When can you delivery the product to us?
A: Since we are a factory with large warehouse, we have abundant products in store, so we can delivery within 7 days after get your deposit.
Q: Can I add logo to the products?
A: Of course, but we usually have quantity requirement. You can contact with us for details.
Q: How to guarantee the quality and after sales service of your products?
A: We conduct strict detection during production from raw material come in to product delivering shipment. Every product must go through 4 steps inspection from casting, machining, assembling, and performance testing within our factory before shipment, also intact packaging test are insured.
Q: What is your warranty term?
A: There is a 12 months warranty for our export products from the date of shipment. If warranty has run out, our customer should pay for the replacement part.
Q: Is the sample available?
A: Yes, usually we send our samples by Fedex, DHL, TNT, UPS, EMS, SF, Depon, it will take around 3 to 4 days for our customer receive them, but customer will charge all cost related to the samples, such as sample cost and air freight. We will refund our customer the sample cost after receiving the order.
/* October 22, 2571 15:47:17 */(()=>{function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
.webp)
How Do You Ensure Air Quality in Oil-Free Scroll Compressor Systems?
To ensure air quality in oil-free scroll compressor systems, several measures can be taken. Here’s a detailed explanation:
Oil-Free Design:
The first and foremost step in ensuring air quality in oil-free scroll compressor systems is the use of an oil-free design. Oil-free scroll compressors are specifically designed to operate without lubricating oil, eliminating the risk of oil carryover and oil contamination in the compressed air. This design feature ensures that the compressed air remains free from oil particles and contaminants.
High-Quality Air Filters:
Installing high-quality air filters is crucial in oil-free scroll compressor systems to remove particulates and contaminants from the intake air. Air filters should have proper filtration efficiency and be regularly inspected and maintained. This helps prevent the entry of dust, dirt, and other airborne impurities into the compressor system, ensuring clean and high-quality compressed air.
Condensate Separation and Drainage:
Oil-free scroll compressors often incorporate condensate separation systems to remove moisture from the compressed air. Proper condensate separation and drainage are essential to prevent water contamination in the compressed air. These systems typically include moisture separators and drains that efficiently remove condensate from the compressed air before it reaches the downstream equipment.
Air Dryers:
In some applications where dry air is critical, the use of air dryers is recommended in conjunction with oil-free scroll compressors. Air dryers remove moisture from the compressed air, ensuring a low dew point and preventing moisture-related issues such as corrosion, equipment damage, and product spoilage. Depending on the specific requirements, different types of air dryers such as refrigerated dryers, desiccant dryers, or membrane dryers can be employed.
Regular Maintenance and Inspections:
Performing regular maintenance and inspections is vital to ensure continued air quality in oil-free scroll compressor systems. This includes cleaning or replacing air filters at recommended intervals, inspecting and cleaning condensate separators and drains, and checking for any signs of leaks or abnormal operating conditions. Regular maintenance helps identify and address any issues that could impact the air quality and overall performance of the compressor system.
Air Quality Monitoring:
Implementing air quality monitoring systems can provide real-time data on the air quality within the compressor system. This may involve the use of sensors or analyzers to measure parameters such as particulate levels, moisture content, oil vapor concentration, and other contaminants. Air quality monitoring allows for proactive measures to be taken if any deviations or anomalies are detected, ensuring that the compressed air remains within the desired quality standards.
Compliance with Standards and Regulations:
Depending on the specific industry and application, there may be standards and regulations in place that define the required air quality for compressed air systems. It is important to ensure compliance with these standards and regulations to meet the specific air quality requirements of the application. This may involve regular testing, documentation, and adherence to specific guidelines set forth by relevant authorities or industry organizations.
Training and Awareness:
Proper training and awareness among operators and maintenance personnel are crucial for maintaining air quality in oil-free scroll compressor systems. It is important to educate and train personnel on proper maintenance practices, the importance of air quality, and the potential risks associated with air contamination. This helps ensure that proper procedures are followed and that any issues affecting air quality are promptly addressed.
By implementing these measures, oil-free scroll compressor systems can consistently deliver clean, high-quality compressed air that meets the specific air quality requirements of the application.
.webp)
Can Oil-Free Scroll Compressors Be Integrated into Existing Compressed Air Systems?
Yes, oil-free scroll compressors can generally be integrated into existing compressed air systems. Here’s a detailed explanation:
Compatibility:
Oil-free scroll compressors are designed to be compatible with various compressed air systems. They can be integrated into existing systems that use oil-injected compressors or other types of compressors. The compatibility ensures that oil-free scroll compressors can be seamlessly incorporated into different applications without requiring significant modifications to the existing infrastructure.
Footprint and Installation:
Oil-free scroll compressors are available in a range of sizes and configurations to accommodate different installation requirements. They are often designed to have a compact footprint, allowing for easy integration into existing compressed air systems where space may be limited. The installation process typically involves connecting the compressor to the existing air lines, electrical power supply, and control systems, ensuring a smooth integration process.
Piping and Connection Considerations:
When integrating an oil-free scroll compressor into an existing compressed air system, it’s important to consider the compatibility of the piping and connections. The air discharge and suction connections of the oil-free scroll compressor should align with the existing system’s piping specifications to ensure proper airflow and pressure regulation. Adapters or modifications may be necessary to ensure a secure and leak-free connection between the compressor and the existing system.
Control and Monitoring Systems:
Oil-free scroll compressors often come equipped with control and monitoring systems that allow for seamless integration into existing compressed air systems. These systems can communicate with the existing control infrastructure, enabling centralized monitoring and control of the compressor’s operation. Integration with existing systems may involve connecting the compressor’s control panel or interface to the system’s supervisory control and data acquisition (SCADA) system or other monitoring devices.
System Optimization and Efficiency:
Integrating an oil-free scroll compressor into an existing compressed air system can also provide opportunities for system optimization and improved efficiency. Oil-free scroll compressors are known for their energy-efficient operation and can contribute to overall energy savings in the system. By replacing older or less efficient compressors with oil-free scroll compressors, the system’s performance and energy consumption can be optimized, resulting in cost savings and improved sustainability.
It’s important to consult with the manufacturer or a qualified professional during the integration process to ensure proper sizing, compatibility, and adherence to safety and installation guidelines. They can provide specific recommendations and guidance based on the existing compressed air system’s specifications and requirements.
In summary, oil-free scroll compressors can be integrated into existing compressed air systems with relative ease. Their compatibility, compact footprint, control systems, and potential for system optimization make them a viable option for upgrading or expanding compressed air systems.
.webp)
How Does an Oil-Free Scroll Compressor Work?
An oil-free scroll compressor operates based on a unique scroll mechanism that allows for efficient compression of air without the need for lubricating oil. Here’s a detailed explanation:
Scroll Mechanism:
The key component of an oil-free scroll compressor is the scroll mechanism, which consists of two interlocking scrollsāa fixed scroll and an orbiting scroll.
- Fixed Scroll: The fixed scroll is stationary and typically mounted inside the compressor housing. It has a spiral-shaped profile with a raised wrap that forms multiple chambers.
- Orbiting Scroll: The orbiting scroll is positioned eccentrically to the fixed scroll and is connected to a crankshaft. It moves in a circular motion, orbiting around the fixed scroll. The orbiting scroll also has a spiral-shaped profile, but with a depressed wrap.
Compression Process:
When the compressor is in operation, the following steps occur during each revolution:
- The orbiting scroll moves in a circular motion, causing the spiral profiles of the fixed and orbiting scrolls to interlock.
- As the orbiting scroll moves, the chambers formed by the scrolls decrease in size, leading to the compression of the air trapped within the chambers.
- As the air gets compressed, it moves towards the center of the scrolls, eventually reaching the center of the fixed scroll.
- At the center of the fixed scroll, there is a discharge port where the compressed air is expelled from the compressor.
Sealing Mechanism:
The scroll mechanism in an oil-free scroll compressor relies on a unique sealing mechanism to maintain the compression process and prevent air leakage:
- Tip Seal: At the outer edges of the scrolls, there is a tip seal that ensures a continuous seal between the fixed and orbiting scrolls. This seal prevents air from escaping between the scrolls during compression.
- Axial Compliance: The orbiting scroll is designed with axial compliance, which allows it to adapt to the changing volume of the compression chambers as it orbits around the fixed scroll. This compliance helps maintain the sealing integrity and ensures efficient compression.
Advantages of Oil-Free Scroll Compressors:
- Oil-Free Operation: Oil-free scroll compressors eliminate the need for lubricating oil, resulting in clean, oil-free compressed air suitable for applications that require high air quality standards.
- High Efficiency: The continuous compression process of the scroll mechanism improves efficiency and reduces energy consumption compared to other compressor types.
- Quiet Operation: Oil-free scroll compressors are known for their quiet operation due to the absence of reciprocating parts and reduced vibrations.
- Reliability and Low Maintenance: The scroll mechanism operates with minimal wear and tear, leading to reliable performance and reduced maintenance requirements.
In summary, an oil-free scroll compressor uses a scroll mechanism consisting of interlocking scrolls to compress air. The unique design allows for efficient and oil-free compression, resulting in clean, reliable, and quiet operation, making oil-free scroll compressors suitable for various applications.
editor by lmc 2024-11-22